Description
VIP 'Power Mix' - 1 Minute 2K Polyurethane Universal Repair Adhesive
1 pack containing 2 x 50ml kits - 2-part syringe cartridges of VIP power Mix 2K polyurethane adhesive.
Black in colour, cures in 1 minute (full cured time 24H).
Unique industrial adhesive suitable for plastic and metal.
Part No. VIP21B
(Packaging / labeling may vary from images)
In many areas of industry 2-component Polyurethane- Systems are among the most used bonding systems. One
of the outstanding advantages of a 2K PUR is the wide range of adjustability of its characteristics. The rapid
development of new ranges of substrates and processes creates always changing demands on the adhesive
mechanisms. Through decades of building up the competence in adhesives-engineering for the classic plastic to
plastic and plastic to metal bonding, as well as plastic repair, VIP developed an “Industrial Standard” through its
2K PowerMix Universal recipes. With potlifes ranging from 30 seconds to 45 minutes and more, all thinkable
bonding operations are actually possible, from manual application to automated processing, from the small
speedy fixation to any large area bonding operation. 2K PowerMix Universal is a system for dynamically
demanding, high strength bonds, which need to retain some flexibility to maintain a high degree of mechanical
strength. With an outstanding application consistency 2K Power Mix is the ideal solution for repairing, gap filling,
sealing and bonding, as it builds a solid plastic material after hardening. In general a 2K-system always stands for
controlled and fast cure and makes bonding independent from surrounding temperature, humidity and bead
thickness.
Pro-facts at a glance:
Easy clean handling, non dripping, shapeable
Extremely fast controlled cure (from the inside to the outside)
Cures independent of surrounding temperature, humidity or bead thickness
Steadfast bonds, permanently flexible, Non sag
Good weathering and ageing resistance
Reworking like sanding, drilling and threading within 15-30 mins.
Overpaintable after approx. 60 mins.
Free of solvents and other VOC’s
Resists water, oil, petrol, solvents, acids and alkalines
Adjustment of Shore-hardness and work times possible
Good impact resistance
Applications:
Areas of use:
Applications:
Automotive & Truck & Transport:
>> Coach building
>> Automotive
>> Caravan
>> Buses
>> Truck & Transport
>> Trains (Coach building)
>> Farming Machinery
>> Special Transport Manufacturing
Effective Repair of damaged plastic parts
(Bumpers, Side Mirrors, Sports Seats,
Spoilers, Headlights and other Lightfittings,
Roof racks, Plastic Covers and Housings,
Trims)
Repair of holes and cuts (e.g. PUR Form
elements, Radiators, etc.)
Sandwichelements, Box Vans, large Cover
Elements, Covers, Shades, Interior-
Elements, Edge Supports
Bonding of Interior Components
Bonding of wooden floors on steel frames
Exterior Covers
GRP Parts in Front- and Back areas
Sealing of ovelapping panels, profiles, wet
rooms, Skylights, Tailgates
Seam sealing
Bonding of sport seat shells
Bonding of dashboards
Fixations in the doors(e.g. crash pads)
Fixation of body panels
Bonding in of fixations for the individual
adjustment of body panels (black pegs)
Bonding of wood panels onto dashboards
Bonding of interior covers for the hood
Rigid bonding of all types of plastic
Structural & Civil Engineering Signs, Mirrors, Trims, Reinforcements,
Supports
Restoration & Renovation,
Roofs, Windows, Panels
Cable shafts
Filling of holes, cuts and seams in metal,
wood, stone, concrete or glass
Bonding of large surfaces
Filling of hollows in walls etc.
Repair of broken out drill holes
High spec assembly bonding
3
2K Polyurethane Power Mix – Universal 1 minute
Window, Doors , Conservatories, Glass Industry Windowframes, Corner frames
Square angle bonding
Marine & Ship Building Bonding of Interior Elements
Bedding of clamps and fittings
Wind & Solar Energy Repair of small holes and defects on the
rotor blades (Emergency Repair)
Bonding of insertions and additions on the
rotor blades (e.g. Lightning receptors)
Bonding in of cable shafts
Plastic Working Industry Fast fixation of Mountings (Clips, Lugs,
etc.)
Individual adaptability of plastic parts
Insertion of rubberlips, shafts, rings
Filling of pores
Fast bodyfiller for repair of holes, cuts,
imperfections on PUR moulded elements
Bonding of special models
Design and Prototyping
Metal Working Industry Mountings, Sleeves
Supports, Reinforcements
Wood Working Industry Bonding of Foot-elements on furniture
Woodfiller
Bonding of broken of hinges or wood
connectors
Plant-, Model- and Machinery Engineering
Structural bonding on various substrates
DIY
Various applications & repairs for home,
hobby and garden
Technical properties:
Chemical base 2-K Polyurethanes (PUR)
Product name
Power Mix Universal
Colour
Opaque, black
Directions for use:
Before the Application of the Power Mix it is necessary to check the material safety data sheet (MSDS) for info on
precautions and security measures associated with the product. Even on not classified products the usual
precautions for chemical materials should always be adhered to.
Easy application with a hand operated or pneumatic dosage gun. To prevent any irregularities in the dried product
a guaranteed (1:1) mixing ratio (volume) must be achieved at all times. This is only possible using the suitable
static mixers with a minimum of 16 mixing elements as recommended by VIP.
Attach mixing nozzle to your chosen cartridge. Always ensure that both channels of the cartridge are open and not
blocked. Before starting the real application dispose of a small amount (5cm). Now the correct mixing ratio is
guaranteed and the product is ready for use.
Surfaces must always be dry and free of dust, oils or any grease. For cleaning we recommend the VIP Special
Cleaner. In general the use of a chemical (use of a primer) or mechanical preparation (sanding, shot blasting, etc.)
always increases the adhesion on the surface to be bonded.
Depending on the type of plastics please abrade the surface with sandpaper and when repairing cuts please cut
out a “V”-groove. Remove any old paint by sanding it off. Please use a plastic primer on all plastics (except
GRP). Spray on the adhesion promoter (VIP Primer) and let it flash off approx. 5-10 minutes. On thermoplastics
(PVC, PC, PMMA, etc.) you can prime using an Isopropyl alcohol (IPA). Other types of solvents can damage the
surface.
Afterwards go directly onto the parts to be bonded. Apply the adhesive immediately either as a thin film (approx.
0.2mm), a bead or a droplet onto the substrate. If required please smoothen the bead with a plastic spatula. The
thickness of your bead should depend on the type of materials to be bonded. Please ensure that you connect the
parts within the potlife of the chosen adhesive and press them together firmly to achieve a good adhesion.
The cure time is dependent on thickness, working temperature and the temperature of your substrates (per 10°C
higher or lower temperature, the cure time can half or double up). Thick beads harden quicker than thin films. The
optimum working temperature is @ 22°C. Materials with a high degree of temperature-lead-through can prolong
the curing process. If the substrate is too cold, a thin (mostly invisible) film of condensed water might build on the
surface, and this can cause adhesion failure. This can be prevented by tempering the surface prior to the bonding
process.
For some repairs the usage of a reinforcement film on the back of holes and cuts can be beneficial. Contouring
films can help with modelling and shaping the adhesive. These foils need to be removed after cure.
Please avoid longer pauses, as the adhesive will cure in the mixing nozzle. Any reworking (e.g. sanding) of the
material is possible after 15-30 minutes. The bonded area can be overpainted after full curing.
For overpaintability of PUR we recommend the use of solvent based 1K or 2K resin systems or waterbased
systems. In most cases those paint systems and coatings are based on polyurethanes and therefore in the same
chemical family as the adhesive.
On all unprepared metals we recommend to clean (degrease) with a solvent based spirit wipe first and afterwards
sand or shot blast the surface first. Remove any rust or other corrosion and fill the damaged areas (VIP liquid
metal, knead metal). If the substrate is too cold, a thin (mostly invisible) film of condensed water might build on the
surface, and this can cause adhesion failure. This can be prevented by tempering the surface prior to the bonding
process.
Caution: The mixing of the two components causes a chemical reaction with a strong exothermal build up of heat.
When mixing larger amounts (approx. 5mm bead thickness) a plainly recognisable rise in temperature in the
material will occur. The reaction temperature will not exceed 90°C. Do not discard the reacting material in plastic
bins and do not hold metal work pieces in your hands while the adhesive is curing
Safety Information:
CLICK HERE TO VIEW TECHNICAL DATA SHEET